Loading... Please wait...

MPF-100B - Standard 10” Hawse Fairlead - Black

  • Image 1
  • Image 2
  • Image 3
  • Image 4
4.00 LBS
Calculated at checkout
Current Stock:
Out of stock

Sorry but this item is currently unavailable.

Please check back at a later stage.


  1. Precision machined from solid billet aluminum
  2. Made in the USA
  3. Enlarged opening allows Superline XD eye splice and up to 9/16” tube thimbles to pass through
  4. Mounting guide machined into back of fairlead ensures proper winch plate/bumper mounting clearance to prevent rope damage
  5. Made from 1” thick aluminum for additional strength
  6. Larger contact surface decreases stress on rope
  7. Industrial grade powder coat finish
  8. Includes mounting hardware


Weight 2.4 lbs (1.08 kg)
Material 6061-T6 Aluminum
Finish Black Superdurable Powder Coat
Width 11.80" (300 mm)
Height 3" (76 mm)
Thickness 1" (25 mm)
Opening Width 7.50" (190 mm)
Opening Height 1.10" (28 mm)
Mounting Bolt Width 10" (254 mm)
Bolt Hole Diameter 0.45" (11 mm)
Applications For use with synthetic winch lines only
Includes Mounting Hardware 7/16"-14 x 1" Hex Drive Socket Cap Screws, lock washers, and nuts


A Master Pull hawse fairlead is the perfect addition when converting to a synthetic winch line. Our fairleads are precision machined right here in the USA out of 6061-T6 aluminum. Unlike most fairleads, which are 0.75” thick, we use 1” thick bar stock for durability and strength. The additional thickness also provides more contact surface for the winch line to ride on, reducing stress and wear on the line.

We designed this fairlead with an enlarged opening in the center that tapers down at the ends. This allows the thicker splice of the over-braided Superline XD winch line to fit through the opening and up to a 9/16” tube thimble will pass through as well.

When installing a fairlead it is extremely important to ensure that the winch line will not contact any sharp edges of the bumper or winch plate opening. Our fairleads have a groove machined into the back face which serves as a mounting guide to easily see if the fairlead is mounted correctly. If the opening on the bumper or winch plate is smaller than the guide you will have to enlarge the opening slot on your bumper or winch plate with a grinder. For more information, check out our Winch Line Installation Guide.

Aluminum hawse fairleads have many advantages over roller fairleads. First and foremost is the significant weight savings. Typical steel roller fairleads weigh between 10 and 15 pounds, where the MPF-100B is a fraction of that, weighing just over 2 pounds. Our fairlead is only 1” thick compared to a roller fairlead which has a typical depth of 3.5” - 4”. This increases approach angle and minimizes the chance of damaging your fairlead or synthetic winch line when climbing or descending obstacles. Also, the small footprint of the hawse fairlead allows easier installation on smaller bumpers and winch plates. And unlike steel roller fairleads, Master Pull fairleads will not rust.


Over Roller Fairleads

  • Significantly lighter
  • Tucks closer to vehicle for better approach angle
  • Smooth even surface for synthetic rope
  • Will not rust

Add to Wish List

Click the button below to add the MPF-100B - Standard 10” Hawse Fairlead - Black to your wish list.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!